Enercon Releases 2nd Generation of the Blown-ion™ 500 Plasma Surface Treater with an Expanded Operating Window
Enercon’s original Blown-ion™ 500 plasma treater broke new barriers with its ability to provide wide, high and uniform treatment levels at process speeds never before possible with in-line plasma technology. The innovation continues as Enercon releases its second generation of this remarkable technology. “Maintaining a consistent plasma simultaneously over six separate plasma discharge ports requires…
Read MoreEnercon Offers the Widest Range of Surface Treating Technologies at NPE
Get your chance to see the industries’ most comprehensive platform of PLASMA, FLAME & CORONA surface treating technologies in the FRONT ROW of NPE’s West Hall (Booth W6643). (Get your free pass using code 47342.) Object Treating Technologies & Applications Witness plasma treating in action & how it improves surface adhesion on all types of…
Read MoreNew Blown-ion™ 500 Plasma Surface Treating Technology Enables Rockwell Automation’s Switch from Print-and-Apply Labels to In-Line Digital Printing
When Rockwell Automation moved its contactor and relay production back to Milwaukee, Wisconsin, it had to develop an entirely new process for the changing volumes and available space. The new highly automated assembly line would also be a showcase of Rockwell’s automation capabilities, featuring Rockwell drives, motors, Independent Cart Technology (ICT), PLC’s, HMI’s, sensors, and…
Read MoreMyths and Mysteries of Measuring Dynes, Surface Free Energy & Contact Angle
Since plasma and flame surface treatment create no visible changes to a surface, methodologies have been developed to measure the changes to a surface after treatment. These diagnostics are quite valuable, but they are often conducted with flawed testing practices and the results are frequently misunderstood. In this new webinar, experts from Enercon & KRÜSS…
Read MoreAdvances In Adhesion With Co2-Based Atmospheric Plasma Surface Modification
Abstract The use of gas and/or liquid-phase carbon dioxide (CO2) with atmospheric plasma discharge surface pretreatment technology can remove micron and submicron particulates and hydrocarbon-based contaminations on plastics and metals. The cleaning process is based upon the expansion of either liquid or gaseous carbon dioxide through an orifice. The paper provides an understanding of the…
Read MorePlasma & Flame Surface Treatment Distance & Dwell Time Recommendations for Consistent Treatment Results
What is the ideal distance between the treatment head and the surface to be treated? The answer depends on the surface treater you are using and your specific application. However, there are some general guidelines that you should be aware of: Treatment Distance Treatment Dwell Time Treatment Angle Measuring Treatment Success Pretesting and good documentation…
Read MoreClean is good, but is it good enough for successful adhesion?
Smart manufacturers recognize the importance of a clean surface when bonding components. If a part is not clean, the adhesive will bond to the surface contamination rather than directly to the surface itself. Manufacturers commonly use a solvent to clean the surface. However, this isn’t always enough to produce the desired adhesive outcome. A clean…
Read MoreHow and why plasma and flame surface treating improve surface adhesion.
Common adhesion impediments found on surfaces. Non-porous and hydrophobic surfaces have low surface energy with few available bonding sites due to low levels of charged ions on the surface. Additionally, any type of surface contamination affects adhesion negatively. This contamination can include material additives & release agents which can migrate to the surface. Clean, Etch…
Read MoreBest Practice for Integrating Plasma & Flame Surface Treaters
In this paper INPRO Technologies Incorporated and Enercon Industries discuss a variety of ways to use plasma or flame for surface preparation. Industries like automotive, aerospace, window and door, assembly, medical, wire & cable, electronics, decorating, and packaging rely on surface treating technologies. Learn about options and considerations for:– Working with flame or plasma– Moving…
Read MoreThree Mistakes to Avoid When Plasma Treating
We have many customers who have tried a corona or plasma treating solution in the past with failed results and were very hesitant to give plasma a second try. However, there are three areas which can be corrected for improved results: using the right plasma technology with the proper set up, having the proper protocols…
Read More