Surface Treating Handbook
Enercon’s Surface Treating Handbook is full of useful information when working with your corona treater. Inside you’ll find: Download this digital pdf by completing the form. If you would like a hard copy, please use the comments field to request one. Innovative People Ensuring Your Treating Success. Enercon delivers custom and innovative surface treating technologies…
Read MoreGetting Started with Corona Surface Treatment
This free eBook shares expert insights from Surface Treating Experts. Discover how Converters & Extruders use Corona Treating to Improve Adhesion Corona treating improves a film’s receptiveness to inks, coatings, and adhesives. In this informative eBook, you’ll find insights on how corona treating works, application examples and considerations when specifying corona treaters. See what Enercon…
Read MoreSpecifying the right Corona Treater when Buying from an OEM
When purchasing a new line or press from an OEM, the specifications on the corona treater are often a secondary consideration. However, properly specifying the corona treater pays massive dividends down the road. Let’s look at some tips to keep in mind when working with an OEM on a new line that features a corona…
Read MoreWhen performance matters, find out why more converters & extruders specify Enercon over any other brand.
When you purchase a new converting or extrusion line from an OEM, you have the opportunity to specify the brand of corona treater that you prefer. OEMS in our industry tell us when a brand is specified, it’s almost always Enercon…and with good reason. Enercon was founded nearly 50 years ago on principles that remain the…
Read MoreThe Importance of Specifying your Corona Treater When Ordering a Line Through an OEM
Corona treaters are not the most expensive part of your new line, but get the treatment wrong and your new line will be producing scrap at record rates. That’s why it’s critical for converters and extruders to pay special attention to the corona treater being supplied with their new OEM lines. Buyers of new OEM…
Read MoreHow to Prevent and Reduce Corona Treater Downtime with PRO Power Supplies
Enercon power supplies are recognized for their reliability, but did you know their innovative features can prevent & reduce downtime? Enercon Compak™ Pro Power Supplies are compatible with any make or model corona treater station. So, whether you already own one or would like to benefit from these features, you won’t want to miss this…
Read MoreHow to Set Your Wide Web Corona Treater’s Air Gap
For more information on how to adjust your air gap please consult your Enercon manual for a detailed procedure or contact Enercon’s service team. You may also request a complimentary Enercon gap gauge as seen in the video.
Read MoreMeasuring Surface Energy On Non-Woven Substrates
There is no easy way to determine changes in surface energy on non-woven and woven substrates and we know of no official standards such as an ASTM method but there is a procedure. There are several methods to characterize the surface energy of nonwovens fibers. Of these, contact angle is the most readily applied. One…
Read MoreRecommended Surface Energy & Treatment Ranges for Printing & Coating Polymer Surfaces
We’re often asked what dyne level do I need to print on a particular type of film. Its a complex question that includes many variables beyond the material type and method of printing or coating. We can however provide general guidelines that you can use to start your own evaluations. The tables below list general…
Read MoreUsing Dyne Solutions and Dyne Pens to Measure Surface Energy On Non-Porous Substrates
Non-porous substrates, such as polyethylene, polypropylene and foils, need to have their surface energies altered in order for the proper flexographic ink adhesion to occur. An old general rule of thumb is that the substrate should have a dyne level (surface-energy measurement) of at least 10 dynes higher than the surface energy of the ink…
Read More