Unable to Control Output Level - Compak, Compak Convertible, Integral II

Symptom

The unit starts and runs, but the output level cannot be raised or lowered from the displayed output level.

Fault

The output levels cannot be adjusted with changing production needs.

Solution

1. Open the power supply and inspect the ribbon cable. Ensure it is properly plugged in. If damaged, replace the ribbon cable.
2. Inspect the green and silver ribbon cable on the membrane assembly. Ensure it is not broken or damaged. If damaged, replace the membrane assembly.
3. Replace the Control Board.
4. If you have questions or experience problems with your Enercon cap sealer please contact us at 262-255-6070