CoronaFlex™ Corona Treater

Enercon's - CoronaFlex™

Improve Ink Adhesion with
CoronaFlex™ Corona Treater

Improving ink adhesion has never been easier with the new CoronaFlex™ corona treater. It is specifically designed for high speed flexographic presses and versatile digital printing applications.

Corona treaters increase the surface energy of label stock to improve wettability and adhesion of inks and adhesives.

CoronaFlex™ offers OEMs and printers powerful and reliable corona treatment through a compact footprint, intuitive operator interface and industry leading application expertise.

  • IMPROVE INK ADHESION FOR
    FLEXO & DIGITAL PRINTERS
  • POWERFUL TREATMENT
  • TREATS BOTH CONDUCTIVE &
    NON CONDUCTIVE LABEL STOCK
  • COMPATIBLE WITH ANY
    OEM PRINTING PRESS
  • TREATS WEB WIDTHS
    UP TO 32” (810 MM)
Enercon's - CoronaFlex™
CoronaFlex™
  • Control:

  • Intuitive Touch Screen Control

    Guides operators through operation & power setting. Logs faults and includes on-screen troubleshooting guides

  • Power Control

    Available in Manual, Remote and Watt Density

  • Watt Density & Proportional Speed Control

    Ensures consistent treatment by automatically adjusting the power level to line speed changes

  • Operation:

  • Easy to Operate

    Versatile control options include:
    Auto Start, Remote or Local Control

  • Simple Thread-Up

    Removable electrode cartridge locks into place for
    quick & easy changeover

  • Roll Options

    Bare, Conductive Ceramic & Universal
    to meet needs of your substrates

  • Installation:

  • Compact Footprint

    Integrate into any position on all OEM presses

  • Simple to Install

    All inclusive package engineered for easy start-up

  • Quick Start Guide

    Simple instructions to guide your installation & operation

How Corona Treatment Works

A corona treating system is designed to increase the surface energy of plastic films, foils and paper in order to allow improved wettability and adhesion of inks, coatings and adhesives. As a result, the materials treated will demonstrate improved printing quality, faster press speeds and less scrap.

Polymer films and objects have chemically inert and non-porous surfaces with low surface tensions causing them to be non-receptive to bonding with substrates, printing inks, coatings, and adhesives.

A corona treating system consists of two major components: the power supply and the treater station.

The power supply accepts standard 50/60 Hz utility electrical power and converts it into single phase, higher frequency (nominally 10 to 30 kHz) power that is supplied to the treater station.

The treater station applies this power to the surface of the material, through an air gap, via a pair of electrodes at high potential and roll at ground potential which supports the material. Only the side of the material facing the high potential electrode should show an increase in surface tension. (If treatment is applied to the other side of the material it is referred to as backside treatment.)

A corona treating system in its simplest form can be portrayed as a capacitor. Voltage is applied to the top plate which, in the case of a corona treating system, would be the electrode. The dielectric portion of the capacitor would be made up of some type of roll covering, air, and substrate in the corona treater.

The final component, or bottom plate, takes the form of an electrically grounded roll. In the corona treating system, the voltage buildup ionizes the air in the air gap, creating a corona, which will increase the surface tension of the substrate passing over the electrically grounded roll.

TLMI FTA

Get More Information

Enercon power generators and stations are designed to operate in a maximum ambient temperature of 40°C (104°F) @ 80% relative humidity, non-condensing.