Enercon power supplies are designed for reliable and trouble-free operation. The Compak™ 9000 offers automatic 5 to 1 load matching range and the widest turn-down ratio available. Its innovative design takes advantage of state of the art control and power circuit components to meet today's surface treatment challenges.
Should you experience operating problems with the Compak™ 9000 power supply please use links below to guide you through a solution to the problem you are experiencing.
If you continue to experience problems with your Enercon power supply please contact us at 262-255-6070 or via our web contact form.
Blank Micro Display
The following is a description of a blank micro display on an Enercon Compak 9000 power supply. This condition may result from a variety of circumstances.
Breaker Trip
The following is a description of a breaker trip on an Enercon Compak 9000 power supply. This condition may result from a variety of circumstances.
High Temp Fault
The following is a description of a micro display which locks up on an Enercon Compak 9000 power supply.
Hight Voltage Trip
The following is a description of a high voltage trip on an Enercon Compak 9000 power supply.
Inverter Fault Light
The following is a description of an inverter fault on an Enercon Compak 9000 power supply.
Low Output Power
The following is a description of low output power on an Enercon Compak 9000 power supply.
Micro Display Locks Up
The following is a description of a micro display which locks up on an Enercon Compak 9000 power supply.
Station Fault
The following is a description of a station fault on an Enercon Compak 9000 power supply.
Unable to Start
The following is a description of a blank micro display on an Enercon Compak 9000 power supply. This condition may result from a variety of circumstances.