The following is a description of a station fault on an Enercon Compak 9000 power supply.
| Symptom, Fault |
| Symptom |
The station fault light is illuminated on the display panel. |
| Fault |
A station interlock is not satisfied. |
| CAUTION! |
Never defeat an interlock. Always repair the faulty Interlock! |
| |
|
| Solutions |
- Check each station interlock to determine which one is not satisfied.
- Verify each electrode interlock is satisfied when the electrode is in the treat position.
- Verify the exhaust air is sufficient to satisfy the exhaust air flow switch.
- Verify the purge air is sufficient to satisfy the differential pressure switch, if applicable.
- Verify the selector switch for the high voltage or low voltage switching is not stuck in the depressed position, if applicable.
- Verify the secondary zero speed switch is satisfied, if applicable.
|
|