| Controls |
Description |
| Start |
The start button when depressed will start the power supply if all interlocks and the zero speed requirement are satisfied. |
| Stop |
The stop button will stop the inverter firing and discontinue corona. |
| Up/Down Arrow Key Pads |
Depressing either up or down will raise or lower the desired power in kilowatts. |
| |
|
| Indicators |
Description |
| Standby |
The circuit breaker on the power supply is energized and power to operate the system is available. Normally on. |
| Run |
The power supply is operating. The output power will be displayed on the digital meter. Normally on. |
| Temp |
An overtemperature condition exists. Troubleshoot a Temp Light Fault. |
| Gen |
A high voltage breakdown has occurred. Refer to the Gen Trip troubleshooting. |
| Fault |
This light has been utilized to indicate either an overtemperature condition or an inverter fault. Refer to the Fault troubleshooting for assistance. |